ARS-01 & 01S MHD Angular Rate Sensors

Over
30 years of
excellence...

Our Company

About Us

Contact Us

ATA Sensors

Angular Rate Sensors

Calibration & Testing

Application Notes

Export Information

Optical Stabilization

Fast Steering Mirrors

Government Services

Test & Evaluation

Resources

Site Map

Job Postings

NM Spaceport Authority

U.S. Dept. of State

U.S. Dept. of Commerce

                            Contact Us
           to discuss your
       specific applications!


Obsolete
	The ARS-01 is our most rugged angular rate sensor. Originally designed for automobile crash and aircraft ejection testing, the ARS-01 has become a standard for the world's major automotive manufactures and test laboratories, and is equally versatile for use in torsional analysis, motion and vibration sensing and control, and aerospace applications. Durable enough to survive years of crash tests, it is available in two standard models: the ARS-01 and the ARS-01S. The frequency response of the ARS-01 products comply with SAE J-211 Class 1000 frequency response specifications. The ARS-01 and ARS-01S require use of the CA-01 cable assembly.			ARS-01 & 01S MHD Angular Rate Sensor View .pdf format.
	Custom scale factors and ranges are available.

		ATA Sensors' patented MHD angular motion sensors utilize the finest materials and workmanship combined in durable packages that feature: • No moving parts • Dynamic range > 100 dB • Low power consumption • Low cross axis angular sensitivity • Low linear acceleration sensitivity • Integral electronics/low noise • High survivable shock limits • Superior applications support • One-year warranty against defects in materials and workmanship on sensors, 90 days on cables.

Specifications

ARS-01 & 01S MHD Angular Rate Sensors

Dynamic View .pdf format.

ARS-01 Range¹	± 200 radian/sec (± 11,500 degree/sec)
ARS-01S Range²	± 70 radian/sec (±5,000 degree/sec)
Scale Factor³	50 mV/radian/sec (0.87 mV/degree/sec)
Bandwidth⁴	0.3 to 1000 Hz
Cross-axis Angular Error	< 2 %
Linear Acceleration Sensitivity	< 0.005 radians/sec/g (<0.3 degrees/sec/g)
Voltage Noise PSD⁵	1.1 x 10^-10 V²/Hz
Noise Equivalent Angle	< 80 microradians ( rms)
Noise Equivalent Rate	<8 milliradians/s (rms)
Non-linearity	< 0.1 %
Temperature Coefficient⁶	< 0.05 % Scale Factor / ºC

Electrical

Power Dissipation	< 0.3 Watts
Output Impedence	< 100 Ohms
Grounding⁷	Hex base isolated from signal return

Wiring

ARS-01 (requires CA-01 cable assembly)		ARS-01S (requires CA-01 cable assembly)
Red Lead	+Power (+5 Vdc to +15 Vdc)	Red Lead	+Power (+10 Vdc)
White Lead	-Power (-5 Vdc to -15 Vdc)	White Lead	-Power (0 Vdc)
Yellow Lead	Signal	Yellow Lead	Signal
Black Lead	Power and Signal Common (0 Vdc)	Black Lead	Signal Common (+5 Vdc, internally generated reference voltage)

Environmental

Temperature – Operating	-35 to +60 ºC (-31 to +140 ºF)
Temperature - Non-operating	-40 to +85 ºC (-40 to +185 ºF)
Linear Acceleration,Max. Operating	1,000 g any axis
Linear Acceleration, Max. Survivable	10,000 g any axis

Notes:

1. Based on a ± 10V output voltage swing.

2. Based on a ± 3.5V output voltage swing.

3. Measured @ 10 Hz.

      4. The standard frequency response of MHD sensors
          can be extended significantly by the use of digital
          filtering in post processing of signal data as
          covered in ATA Sensors' application note AN-01.

5. Power spectral density flat to angular velocity over
specified bandwidth.

6. Percent change in Scale Factor per ºC @ 10 Hz.

       7. Signal return connected to case (isolated from hex
           base). Do not ground case to mounting fixture to
           avoid ground loops.

All data is believed accurate at time of publication. Specifications are subject to change without notice.
Copyright © 2002-2008 Applied Technology Associates. All rights reserved. Revised: 02/23/2008