|
|
Every ATA
sensor undergoes precise calibration and testing.
ATA's sensors are calibrated at the time of manufacture
and typically do not change significantly in scale
factor or noise floor with time and use; however, we
recommend recalibration every 12 months.
The
ISO-9001:2000 quality process requires
periodic re-calibration and this service is provided by
ATA Sensors.
We also
calibrate other manufacturers sensors and accelerometers
on a custom order basis. Calibration of angular motion
and vibration sensors from DC to 2,000 Hz can
be performed using our dynamic calibration
systems, and our shock testing can evaluate
impacts from 50 g to 2,000 g. We can supply rate
sensors and accelerometers on a custom order basis for
distributors and customers.
|
Calibration & Testing |
|
Over
